NDT Training Courses & Techniques Developments
INSPECTORS Welding Experts Office, LLC
* Provides:
* NDT training courses,
* NDT services,
* Welding and Material Inspection,
* NDT Level III Consulting Services,
* QA/QC Consulting Services,
* Third Party Inspection for Mechanical Equipment.
* Certification Courses:
The course satisfies the training hours needed for Level I, Level II, and Level III certification per:
* (ASNT), SNT-TC-1A (is the recommended practice for Qualification and Certification of Nondestructive Testing Personnel. The practice provides guidelines for employers to establish in-house certification programs for NDT personnel).
* NAS-410 (is Aerospace Industries Association`s National Aerospace Standard for Certification and Qualification of Nondestructive Testing Personnel).
* 3% discount for Online Courses,
* Special offers (for a short time) ask about NDT packages if you are looking for more than two methods.
* flexible schedules*
* NDT Courses & Fees:
* Fees after discount:
* Liquid Penetrant Testing (PT):
14 hours course PT Levels ( I +
II) $640
* Visual Testing (VT):
24 hours VT course Levels ( I + II) $720
* Magnetic Particle Testing (MT):
24 hours course Levels ( I + II) $720
* Radiography Testing (RT) Limited Level II:
40 hours course Level II limited (film interpretation) $1160
* Ultrasonic Testing (UT):
40 hours course UT Level I $1160
40 hours course UT Level II $1160
80 hours course PAUT (phased array) Level II $2260
* Ultrasonic Thickness Testing (UTT):
24 hours course UT Level II limited $720
* Ultrasonic Weld Inspection:
40 hours course UT Welds (QUTE Preparation) $1160
* (CWI) Certified Welding Inspector course Review/Exam Prep:
40 hours course $1160
* Auditing NDT Systems:
32 hours course is prepared to train the Inspector to perform NDT audits at his organization or serve as an outside auditor at his supplier`s
facility and to represent his organization when it is being audited. The course will satisfy the requirements of SNT-TC-1A & NAS 410 & ASME NQA-1 $999
*Fees for training as per NAS-410:
40 hours course PT levels (I+II) $1160
40 hours course MT levels (I+II) $1160
* Level III Review/Exam
Prep:
Basic or UT or RT (40 hours)
$1160
Magnetic Particle or
Liquid penetrant or Visual (24 hours) $720
* Intro to NDT:
40 hours course $1160
* Visual Acuity Test (including to color test):
As required by SNT-TC-1A & CP-189 & NAS-410 & ASME Code & AWS Codes & ASTM & API Standards,
(ASNT VT Level III is the tester) Free for NDT course taker .
** FEE PAYMENT REQUIREMENTS:
1. All Fees must be paid before the start of the class.
2. A $300 deposit is required to book your class.
** IN – PLANT NDT Training (Domestic) Requirements :
Must provide: (1) a room to conduct training, (2) test equipment, (3) airfare ticket.
** All Our Instructors are ASNT NDT level III **
* Nondestructive Testing Services
INSPECTORS Welding Experts Office, LLC Is a leader in the nondestructive testing (35 years) industry by providing a wide array of conventional and state-of-the-art analysis techniques to evaluate materials and welds. Our technical and engineering teams contain qualified inspectors to perform Magnetic Particle Testing (MT), Ultrasonic Testing (UT), Radiographic films interpretation (RT), Liquid Penetrant Testing (PT), Visual Testing (VT), and Specialized Material Analysis that conforms to nationally recognized codes or can be tailored to our client's specific needs.
* Level III Services
Numerous industry guidelines require the oversight of a Level III in both NDT training and the development of internal NDT programs. As an alternative to adding an in-house Level III to your staff, INSPECTORS Welding Experts Office, LLC allows you to utilize our knowledge base and experience on a consulting or “as needed” basis. Non-destructive testing level III also known as ASNT level III is one of the high levels of certification that the American Society of Nondestructive Testing (ASNT) offers.
Our Level III services include (but are not limited to) the following:
- Developing and/or reviewing client’s written practices for the qualification and certification of NDT personnel.
- Developing and/or reviewing client’s NDT procedures.
- Verification of qualifications and/or certifications of NDT personnel.
- Conducting training and qualification testing to certify personnel.
- Representing the client in discussions with customers, sub-contractors, auditors, etc. with regards to your NDT program including procedures and written practice.
- Development of calibration standards and equipment selection.
- Expert witness, depositions, or third part advocacy work.
Our standard Level III Services package consists of a review of your current NDT program, an audit of your existing written practices or authoring new specific documents on your behalf and the designation of INSPECTORS Welding Experts Office, LLC Additional items such as procedure development, expert witness, certification of personnel, etc. will be billed at a set, discounted hourly rate. Additionally, all employees of your company are eligible for discounted training and classes at our facility at a special “Level III Customer” rate.
By retaining INSPECTORS Welding Experts Office, LLC as your Level III resource , you’ll ensure that:
- Compliance with the latest specifications and codes is an integral part of your NDT program.
- Your personnel are qualified and equipped correctly to perform their job functions.
- Records, logbooks, and certifications are maintained and available in case of an audit.
- Supervisors are familiar with the procedures and practices needed to oversee NDT technicians in the field.
- Customers are receiving a better, more detailed product and service offering from you.
Send your request today to discuss how INSPECTORS Welding Experts Office, LLC can become your Level III services provider and put our experience and integrity.
Fees of Nondestructive Testing Services at
INSPECTORS Welding Experts Office, LLC
** No additional charges apply on schedule coordinating or testing time,
|
* Level III Services:------------------------------ |
Price upon request |
|
* Level II Inspector including NDT Equipment for: |
|
|
Visual Testing (VT) $69/hour |
|
|
Ultrasonic Testing (UT) |
$69/hour |
|
Magnetic Particle Testing (MT) |
$69/hour |
|
Liquid Penetrant Testing (PT) |
$69/hour |
|
Radiography film interpretation (RT) |
$69/hour |
|
Vehicle Mileage Charge |
$1.25/mile |
|
Field Services (Inspector minimum charge per day) |
8 hours/day |
|
Additional Hours or daily over time
hours |
$69/hour |
|
Additional Inspector Required (per inspector) |
$65/hour |
**Special Prices for Long Term Contracts**